![]() ![]() In the IE 3000 switch, the bit error-rate range is from 10 -6 to 10 -11. The Ethernet standard calls for a maximum bit-error rate of 10 -8. The secondary alarm is disabled by default.įor more information, see the "Configuring the Switch Temperature Alarms" section. The secondary alarm triggers when the system temperature is higher or lower than the configured high and low temperature thresholds.By default, the primary temperature alarm is associated with the major relay. The primary alarm is enabled automatically to trigger both at a low temperature, -4☏ (-20☌) and a high temperature, 203☏ (95☌).The switch contains two temperature sensors that monitor the environmental conditions inside the switch. For more information, see the "Configuring the Power Supply Alarm" section. You can configure the power supply alarm to be connected to the hardware relays. The alarm is automatically cleared when both power supplies are present or working. If the system is configured to operate in a dual power mode, an alarm triggers if a power supply fails or is missing. The switch monitors dual DC power supply levels. Table 3-1 IE 3000 Global Status Monitoring Alarms Table 3-1 lists the global alarms, their descriptions, and functions. The IE 3000 switch can process alarms related to temperature and power supply conditions, referred to as global or facility alarms. Triggering Alarm Options Global Status Monitoring Alarms.This section includes information about these topics: For more information on how to configure the alarms, see the "Configuring IE 3000 Switch Alarms" section. You can configure the switch to trigger an external alarm device by using the two independent alarm relays (major or minor). You can also configure the switch to send Simple Network Management Protocol (SNMP) traps to an SNMP server. By default, the switch software sends the system messages to a system message logging facility, or a syslog facility. ![]() If the conditions present on the switch or a port do not match the set parameters, the switch software triggers an alarm or a system message. The IE 3000 switch software monitors switch conditions on a per port or a switch basis. Note For complete syntax and usage information for the commands used in this chapter, see the switch command reference for this release. Displaying IE 3000 Switch Alarms Status.This section describes how to configure the different alarms for the Cisco IE 3000 switch. Unsupported Commands in Cisco IOS Release 12.2(50)SE.Working with the Cisco IOS File System, Configuration Files, and Software Images.Configuring EtherChannels and Link-State Tracking.Configuring Cisco IOS IP SLAs Operations.Configuring LLDP, LLDP-MED, and Wired Location Service.Configuring DHCP Features and IP Source Guard.Configuring Flex Links and the MAC Address-Table Move Update Feature.Configuring Resilient Ethernet Protocol.Configuring Optional Spanning-Tree Features.Configuring IEEE 802.1x Port-Based Authentication.Configuring Switch-Based Authentication.Configuring Cisco IOS Configuration Engine.Assigning the Switch IP Address and Default Gateway.53 func actionList(root *Action) *Action ģ13 fmt.Fprintf(h, "cover %q %q\n", p.Internal.CoverMode, b. 6 7 package workĥ0 51 // actionList returns the list of actions in the dag rooted at root 52 // as visited in a depth-first post-order traversal. 2 // Use of this source code is governed by a BSD-style 3 // license that can be found in the LICENSE file. Src/ cmd/ go/ internal/ work/ exec.go 1 // Copyright 2011 The Go Authors. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |